Helmets, BandMasks, Air Control Panels and more than 300 spare parts in stock
The 18B and 28B Full Face Masks are the industry standard in China. Used in conjunction with the KM Hard Shell head protector they comply with ADCI and IMCA safety standards and are suitable for use in warmer waters. Hoods and Face Seals can now be ordered in sizes S, M and L to fit different heads and different faces. The KM97 is the latest edition to the range and incorporates the new 455 Balanced Regulator.
Kirby Morgan range of helmets & masks PDF
Latest Kirby Morgan product bulletin PDF
Dive Lab Sanitising Helmets Bulletin PDF
Kirby Morgan Diamond Closed Circuit Diving Helmet
The Kirby Morgan Diamond was released in February 2020. This is a fully closed circuit helmet, which can return divers’ exhaust gas directly to the surface. With the turn of a knob the helmet can instantly become open circuit or closed circuit. It has been tested in saturation diving for more than 1,500 hours.
CLOSE
Model hood for Kirby Morgan BandMasks with silicone face seal
CLOSE
Available in sizes S, M & L
CLOSE
Hood with face seal
CLOSE
KMB-28B with 455 Balanced Regulator
CLOSE
Bulletin #9 of 2022 - Surface Supplied MOD-1
Kirby Morgan® is very pleased to announce the Surface Supplied MOD-1, the latest addition to our product line of M-48 Modular Full-Face Masks. The Surface Supplied MOD-1 is designed for the dive team requiring a lightweight and durable commercial diving mask. An advanced MOD-1 mask model with specialized passages that allow venting the upper eye cavity is paired with a very comfortable extra stretchy 7 mm attached hood and advanced Surface Supplied Pod. The new Pod is constructed of high-quality materials, including Titanium and specialty polymers to increase durability and eliminate corrosion. The threaded inserts in the jaw frame are used to securely fasten the pod to the mask, unlike other M-48 configurations that allow pods to be removed and replaced by hand without the use of tools. This pod is fixed in place but is easily removable for any required service or conversation to our SCUBA or Rebreather pod.
CLOSE
Bulletin #5 of 2022 Regulator Cover Guard
Products Affected: P/N 525-765, P/N 505-455 and any KMDSI helmet or BandMask® that is configured with a 455 Balanced Regulator
To provide additional protection to the 455 balanced regulator, an updated cover guard is now available for purchase. This will be the standard on all applicable units, once current stock is depleted.

CLOSE
Bulletin #3 of 2020 Cleaning and Sanitizing Kirby Morgan Helmets, BandMasks and Full Face Masks
Kirby Morgan highly recommends cleaning and sanitizing our helmets, BandMasks® and full face masks after every day of diving and/or between individual divers using the same helmet, BandMask® or full face mask. Pay particular attention to the following parts; the oral nasal mask and valve, the outer edge of the mic element (the section that faces the diver’s face), nose block shaft and nose block pad, exhaust system, inside the regulator body, regulator diaphragm, demand regulator exhaust valve, water dump valve and neck dam. Use of antibacterial and chlorhexidine mouthwashes or sprays are ineffective solutions for proper disinfecting.
CLOSE
Back to Kirby Morgan (USA)